ABS COMPONENT
Wheel speed sensor – sensor rotor clearance
• Inspect the clearance between the wheel speed sensor and
sensor rotor for each wheel using the thickness gauge.
$ Wheel speed sensor – sensor rotor clearance:
0.3 – 1.5 mm (0.012 – 0.059 in)
# 09900-20803: Thickness gauge
09900-20806: Thickness gauge
ABS control unit/HU ground wire inspection
• Turn the ignition switch to OFF.
• Remove the seat. (!DL650K4 7-4)
• Disconnect the battery - lead wire.
• Remove the ABS control unit/HU cover 1.
• Disconnect the ABS control unit coupler 2.
13-84 DL650K7/AK7 (’07-MODEL)
PartShark.com
877-999-5686
To Next Page
Loading...
