Suzuki DL650K5 - Page 637

FRONT WHEEL SPEED SENSOR INSTALLATION (For DL650A)
NOTE: Cut the tip of clamp after clamping.
*1
Hold the wheel speed sensor lead wire with
clamp on the top of the radiator.
*8
Pass through the wheel speed sensor lead wire
in front of the brake hose. Make clearance
between the wheel speed sensor lead wire and
the front fender.
*2
Align the protector with the edge of radiator
shield.
*9 Letters should face outside.
*3
Clamp the speed sensor lead wire to brake
hose with wheel speed sensor at white mark-
ing.
*10
Pass through the wheel speed sensor lead wire
forward of the brake hose.
*4
Set the wheel speed sensor lead wire to the
part of the brake hose union with a clamp.
*11
Clamp the wheel speed sensor lead wire for-
ward of the brake hose.
*5
Hold the wheel speed sensor lead wire with
guide at white marking position.
*12
Pass through the speed sensor lead wire inside
the boss of front fork outer tube.
*6
Pass through the wheel speed sensor lead wire
inside the boss of front fork outer tube.
*13
Clamp the wheel speed sensor lead wire to
brake hose with speed sensor lead wire at yel-
low marking.
*7
Clamp the wheel speed sensor lead wire to
brake hose at sleeve.
*4*3
*9
*11
*2
*7
*8
21˚
*12
*1
*5
21˚
*6
Sensor
clamp
*10
*13
DL650K7/AK7 (’07-MODEL) 13-133
PartShark.com
877-999-5686