ENGINE 3-13
• Put the drive chain on the driveshaft.
• Gradually raise the engine assembly and align all the bolt
holes.
• Install the engine mounting bolts and tighten them tempo-
rarily.
• Tighten the engine mounting thrust adjusters to the specified
torque.
$ Engine mounting thrust adjuster:
12 N·m (1.2 kgf-m, 8.5 lb-ft)
• Tighten the engine mounting thrust adjuster lock-nuts to the
specified torque with the special tool.
" 09940-14990: Engine mounting thrust adjuster socket
wrench
$ Engine mounting thrust adjuster lock-nut:
45 N·m (4.5 kgf-m, 32.5 lb-ft)
• After tightening the engine mounting bolt, tighten the pinch
bolt
A.
$ Engine mounting bolt: 55 N·m (5.5 kgf-m, 40.0 lb-ft)
Engine mounting pinch bolt
A:
25 N·m (2.5 kgf-m, 18.0 lb-ft)
• Tighten the engine mounting nuts to the specified torque.
$ Engine mounting nut
A: 93 N·m (9.3 kgf-m, 67.5 lb-ft)
Engine mounting nut: 55 N·m (5.5 kgf-m, 40.0 lb-ft)
PartShark.com
877-999-5686
To Next Page
Loading...
