ENGINE 3-69
OIL FILTER
Before installing the oil filter, fit new O-rings and apply engine
oil lightly to them.
Install the spring
1 and oil filter
2.
'
STARTER IDLE GEAR
Install the idle driven gear
1, shaft
2 and spacer
3.
GENERATOR COVER
Install the dowel pins and new gasket.
Install the reverse lock release cable holder
4 and tighten the
generator cover bolt.
SECONDARY DRIVEN BEVEL GEAR
Install the secondary driven bevel gear shaft assembly
1.
Install the dowel pins.
Use new O-rings to prevent oil leakage.
PartShark.com
877-999-5686
To Next Page
Loading...
