Suzuki LT-Z250 - Page 53

ENGINE 3-11
 Install the reverse gearshift arm.
% Reverse gearshift arm angle
B: 20
 Install the gearshift lever.
% Gearshift arm angle
C: 35
 Adjust the gearshift lever height
D.
% Gearshift lever height
D
DD
D: 0  10 mm (0  0 .4 in)
 Position the carburetor clamps as shown in the illustration.
 After installing the engine, route the wire harness, cables and
hoses properly. (! 9-11 to -14)
 Check the followings.
* Engine oil !2-10
* Engine idle speed !2-9
* Throttle cable play !2-9
Left
Right
Engine side
Air cleaner side
Left
Right
45ß
PartShark.com
877-999-5686