3-10 ENGINE
Install a new exhaust pipe/muffler connector
4 into the muf-
fler lip.
NOTE:
Exhaust gas sealer should be applied to both of the inside and
outside of the connector
4.
EXHAUST GAS SEALER: PERMATEX 1372
Apply SUZUKI SUPER GREASE to the O-rings.
# 99000-25030: SUZUKI SUPER GREASE A ( USA)
99000-25010: SUZUKI SUPER GREASE A (Others)
Install the washer
5.
Install the brake pedal as its slit matches with the punched
mark on the shaft.
Tighten the brake pedal mounting bolt to the specified torque.
" Brake pedal mounting bolt: 11 N•m (1.1 kgf-m, 8.0 lb-ft)
Apply THREAD LOCK to the bolts and tighten each bolt to the
specified torque.
$ 99000-32050: THREAD LOCK 1342
" Footrest bolt: 10 mm: 55 N•m (5.5 kgf-m, 40.0 lb-ft)
Adjust the brake pedal play
A.
% Brake pedal play
A: 20 30 mm (0.8 1 .2 in)
PartShark.com
877-999-5686
To Next Page
Loading...
