Suzuki LT-Z50 - Page 139

5-26 CHASSIS
• Tighten the front suspension arm bolts to the specified torque.
 Front suspension arm bolt: 50 N·m (5.0 kgf·m, 36.0 lb-ft)
• Tighten the front shock absorber bolts to the specified torque.
 Front shock absorber lower bolt: 29 N·m
(2.9 kgf·m, 21.0 Ib-ft)
Front shock absorber upper bolt: 29 N·m
(2.9 kgf·m, 21.0 Ib-ft)
• Tighten the knuckle arm nut to the specified torque and install
the new cotter pin.
 Knuckle arm nut: 50 N·m (5.0 kgf·m, 36.0 Ib-ft)
• Tighten the tie-rod end nut to the specified torque and install
the new cotter pin.
 Tie-rod end nut: 29 N·m (2.9 kgf·m, 21.0 Ib-ft)
NOTE:
Make sure that the steering turns smoothly in both directions.
• Install the front brake. (5-16)
• Install the front grip. (5-6)
• Install the front wheel. (5-8)
After installing the front brake and front suspension, adjust the
following items.
* Front brake lever play. (2-17)
* TOE-IN adjustment. (2-19)
PartShark.com
877-999-5686