CHASSIS 5-37
• Install the spacers left 4 and right 5.
• Tighten the rear hub nut to the specified torque.
Rear hub nut: 75 N·m (7.5 kgf·m, 54.0 Ib-ft)
• Install the new cotter pin.
NOTE:
Bend the cotter pin to outside.
• After installing the rear brake and rear axle housing, adjust
the following items.
* Rear brake lever play........................ 2-17
* Drive chain slack ............................... 2-14 to -16
PartShark.com
877-999-5686
To Next Page
Loading...
