5-36 CHASSIS
• Apply SUZUKI SUPER GREASE “A” to the brake camshaft
and pin.
99000-25010: SUZUKI SUPER GREASE “A” or equivalent
• Install the brake shoes.
REAR SPROCKET AND REAR AXLE
• The stamped mark on the rear sprocket 1 should face out-
side.
• Tighten the rear sprocket bolt to the specified torque.
Rear sprocket bolt:
23 N·m (2.3 kgf·m, 16.5 Ib-ft)
• Bend the rear sprocket washers 2.
• Install the new stopper ring 3 and rear sprocket 1.
• Install the rear axle.
Be careful not to apply too much grease to the cam
and pin. If grease gets on the lining, brake slippage
will result.
PartShark.com
877-999-5686
To Next Page
Loading...
