2-12 PERIODIC MAINTENANCE
• Remove the fixed drive face nut 3 and starter cup 4 with the
special tool.
09930-40113: Rotor holder
• Remove the fixed drive face 5.
• Remove the clutch housing 6 with the special tool.
09930-40113: Rotor holder
• Remove the movable driven face 7 with drive belt 8.
INSPECTION
Inspect the drive belt for wear and damage. If any cracks or
defects are found, replace it with a new one.
PartShark.com
877-999-5686
To Next Page
Loading...
