3-36 ENGINE
MOVABLE DRIVE DISASSEMBLY
• Remove the movable drive face plate 1 and dampers 2.
• Remove the rollers 3.
SPACER INSPECTION
Inspect the movable drive spacer 1 and power reduction spacer
2 for any wear or damage.
If they are worn or damaged, replace them with new ones.
MOVABLE AND FIXED DRIVE FACE INSPECTION
Inspect the drive face for any abnormal condition such as
stepped wear or discoloration caused by burning.
If any defects are found, replace them with new ones.
ROLLER INSPECTION
Inspect each roller and their sliding surface for wear or damage.
If any defects are found, replace the rollers as a set.
NOTE:
The rollers must always be changed as a set.
PartShark.com
877-999-5686
To Next Page
Loading...
