3-56 ENGINE
B: Hooked part
CYLINDER HEAD COVER
• Assemble the cylinder head cover gasket 1.
• Tighten the cylinder head cover bolts to the specified torque.
Cylinder head cover bolt: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
• Tighten the spark plug to the specified torque with a spark
plug wrench.
Spark plug: 11 N·m (1.1 kgf-m, 8.0 lb-ft)
The removed gasket must be replaced with a new one.
PartShark.com
877-999-5686
To Next Page
Loading...
