Svantek SV 973 User Manual

SVAN 973 User Manual – Appendixes
121
XT5 - LEVEL –
Logger Triggering level (TriggerLev)
XL
XLnnn - nnn level in dB  (24  136)
Logger Triggering - Number of records
taken into account before the fulfilment
of the triggering condition (TriggerPre)
XQ
XQnn - nn number of records saved in the
logger before the triggering condition;
nn  (0  10)
Logger Triggering - Number of records
taken into account after the fulfilment of
the triggering condition (TriggerPost)
Xq
Xqnnn - nnn number of records saved in
the logger after the fulfilment of the triggering
condition; nn  (0  200)
Threshold level for PTC calculation
XC
XCnnn:p - nnn level in dB  (70  140)
p: 1, 2, 3 - profile number
Logger File Splitting Mode
XA
XA0 switched off (OFF)
XA-1 - The file is created for each measurement
cycle.
XA15 - The file is created every 15 min.
synchronized to RTC.
XA30 - The file is created every 30 min
synchronized to RTC.
XA60 - The file is created every 1 hour
synchronized to RTC.
XA1440 - The file is created on the specified
times.
Specified Time for Logger File Splitting
XD
XDnnn:p – nnn:
-1 - off.
0:1439 - Time in minutes.
Valid only if SplitMode is equal 1440.
p: 1 … 6 – specified time number

Svantek SV 973 Specifications

General

Brand	Svantek
Model	SV 973
Category	Measuring Instruments
Language	English