To configure a measurement or the instrument, use the menu, which is switched with the <Menu> key.
The menu consists of different type of screens, which include main menu, sections, lists of options, lists
of parameters, text editor screens, information screens etc.
User interface mode
The user interface may be presented in three modes:
Start/Stop, Simple or Advanced. These modes can be
selected in the User Inter. screen of the Instrument
section. The Simple mode enables basic instrument
settings, while the Advanced mode enables full scope
of available settings. Many screens can therefore have
different view depending on the selected operational
mode.
The Start/Stop mode limits the menu to only one
User Interface position in the main menu and
measurement screens.
Note: For parameters hidden in the Simple interface mode the instrument will use settings
previously defined in the Advanced mode or default settings.
When the Simple interface mode is being selected after
the Advanced mode the instrument proposes to restore
the default settings by asking the question: Do you
restore the default value of the advanced settings?
In case of No, all hidden in the Simple mode
parameters will have settings defined in the Advanced
mode. In case of Yes, the instrument will set all hidden
parameters to default values.
Main menu
The main menu (Menu) contains headers of seven sections, which contain
another sub-menu. The main menu is opened after pressing the <Menu> (<Shift>
and <Enter>) key.
Recent Items list
Double-pressing of the <Menu> key opens the list of recently used menu items.
This enables accessing most frequently used lists of parameters and lists of
options quickly, without the necessity of passing through the whole menu.
Selecting position
The desired position in the list is selected with the ▲ / ▼
key.
To Next Page
Loading...
Need help?
General
