Svantek SV 973 User Manual

SVAN 973 User Manual
62
If no measurements were performed the next message is displayed.
The message about the time limit is displayed if the printer (or a PC) is not
connected or there is any other reason that it does not receive data. The
instrument waits for the reaction of the user (any key should be pressed except
<Shift>) and after pressing a key it returns to the Report list.
Below is an example printout of the report.
SVANTEK (C) SV 973 S/N:39039
2017-05-22 13:59:24 T:00:00:05
Profile 1 Slow A
LCpeak: 82.9 Ld : 55.9
LASmax: 77.0 LEPd : 55.9
LASmin: 58.8 Ltm3 : 74.2
LAS : 58.8 Ltm5 : 77.0
LAeq : 55.9 OVL : 0.0
LAE : 62.9
Profile 2 Slow C
LCpeak: 82.9 Ld : 60.8
LCFmax: 80.0 LEPd : 60.8
LCFmin: 53.3 Ltm3 : 77.2
LCF : 60.3 Ltm5 : 80.0
LCeq : 60.8 OVL : 0.0
LCE : 67.8
Profile 3 Slow Z
LZpeak: 83.3 Ld : 68.7
LZFmax: 81.4 LEPd : 68.7
LZFmin: 60.1 Ltm3 : 78.8
LZF : 65.6 Ltm5 : 81.4
LZeq : 68.7 OVL : 0.0
LZE : 75.7

Svantek SV 973 Specifications

General

Brand	Svantek
Model	SV 973
Category	Measuring Instruments
Language	English