Symantec NetBackup 5220 - Page 178

Table 12-8
Manage > License
Recommended actionExplanationError messages
Collect the web GUI and Perl logs all using
the DataCollect command and then
contact Symantec Technical Support.
This error may appear due to
an internal system error.
Selected licenses could not be deleted
for media server {0}.
Selected licenses could not be deleted
for master server {0}.
Try the following actions to resolve this issue:
■ Check whether the license is valid, or
contact Symantec Technical Support.
■ Collect the web GUI and Perl logs all using
the DataCollect command and then
contact Symantec Technical Support.
This error can appear due to
the following reasons:
■ The license key may be
invalid.
■ Due to an internal system
error.
Error in adding License
Collect the web GUI and Perl logs all using
the DataCollect command and then
contact Symantec Technical Support.
This error may appear due to
an internal system error.
Error in deleting License
Collect the web GUI and Perl logs all using
the DataCollect command and then
contact Symantec Technical Support.
This error may appear due to
an internal system error.
Error while retrieving License List.
Collect the web GUI and Perl logs all using
the DataCollect command and then
contact Symantec Technical Support.
This error may appear due to
an internal system error.
Error occurred while loading the
license keys.
Collect the web GUI and Perl logs all using
the DataCollect command and then
contact Symantec Technical Support.
This error can appear due to
the following reasons:
■ The license key may be
invalid.
■ Due to an internal system
error.
License key: {0} failed to install on
media server {1}.
Table 12-9 lists all the error messages, displayed on the Manage > Migration
Utility tab.
178NetBackup Appliance error messages
Error messages displayed on the NetBackup Appliance Web Console