Table 12-9
Manage > Migration Utility
Recommended actionExplanationError messages
Please try again as it can be due to an
intermittent communications error. If
the problem persists, collect the GUI
logs using the DataCollect
command for additional details or
contact Symantec Technical Support.
This message appears when there is
an internal NetBackup problem or a
communications error.
Failed to send the selected criteria.
Please try again as it can be due to an
intermittent communications error. If
the problem persists, collect the GUI
logs using the DataCollect
command for additional details or
contact Symantec Technical Support.
This message appears when there is
an internal NetBackup problem or a
communications error.
Failed to cancel the job.
Please try again as it can be due to an
intermittent communications error. If
the problem persists, collect the GUI
logs using the DataCollect
command for additional details or
contact Symantec Technical Support.
This message appears when there is
an internal NetBackup problem or a
communications error.
Failed to view the job details.
Please try again as it can be due to an
intermittent communications error. If
the problem persists, collect the GUI
logs using the DataCollect
command for additional details or
contact Symantec Technical Support.
This message appears when there is
an internal NetBackup problem or a
communications error.
Failed to send the selected policy.
Table 12-10 lists all the error messages, displayed on the Manage > Software
Updates tab.
Table 12-10
Manage > Software Updates
Recommended actionExplanationError messages
Please check the network connection
to Symantec’s software update center,
or check the script for internal errors.
This error is displayed when the
appliance fails to get the online
updates.
Load online updates failed.
Please check the script for internal
errors.
This error is displayed when you do
not get the available update, that is
you cannot get the status of the
downloaded software update.
Load available updates failed.
179NetBackup Appliance error messages
Error messages displayed on the NetBackup Appliance Web Console
To Next Page
Loading...
