Chapter 4 Provisioning the TimeProvider
Provisioning Alarms
126 TimeProvider User’s Guide 097-58001-02 Revision C – August 2005
^^^”OUTA:<outstatus>”<cr><lf>
^^^”OUTB:<outstatus>”<cr><lf>
^^^”OUTC:<outstatus>”<cr><lf>
^^^”OUTD:<outstatus>”<cr><lf>
;
Response
<aid> Description
SYS Displays the connectivity status of the System, Expansion Panel, and
any alarms associated with the Expansion Panel
<pwra> – PWRA-OK | PWRA-FAIL
<pwrb> – PWRB-OK | PWRB-FAIL
<expfail> – EXP-OK | EXP-ALM
<extalm1> – EXT1-OK | EXT1-ALM
<extalm2> – EXT2-OK | EXT2-ALM
<ioc1eqpt> – IOC1-EQPT | IOC1-UNEQPT
<ioc2eqpt> – IOC2-EQPT | IOC2-UNEQPT
<sysqlevel> – System (output) Quality Level 1|2|...|9
<lastdat> – Date of last instance the system was provisioned by a
user; format is YY-MM-DD
<lasttim> –Time of last instance the system was provisioned by a
user; format is HH-MM-SS
IMC Displays all conditions related to the Information Management
module
<ioc1comm> – IOC1COMM-OK | IOC1COMM-FAIL
<ioc2comm> – IOC2COMM-OK | IOC2COMM-FAIL
IOCm
m = 1 | 2
Displays the current setup and conditions related to the system-level
function of the IOC module
<iocstatus> – OK | ALM (IOCFAIL)
<ioccomm> – IOC1TO2COMM-OK | IOC1TO2COMM-FAIL
IOC2TO1COMM-OK | IOC2TO1COMM-FAIL
<imccomm> – IMC1COMM-OK | IMC1COMM-FAIL
IMC2COMM-OK | IMC2COMM-FAIL
GPS Displays GPS Input state and any alarm events associated with GPS
input. Unequipped indicates TPIUEQPT connectivity alarm.
<gpsstatus> – OK | ALM | UNEQUIPPED
PRS Displays PRS Input state and any alarm events associated with PRS
input
<prsstatus> – OK | ALM
INPp
p = 1 | 2
Displays Input state and any alarm events associated with Inputs 1
or 2
<inpstatus> – OK | ALM
To Next Page
Loading...
Need help?
General
