Symmetricom TimeProvider 1000 User Manual

Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
164 TimeProvider User’s Guide 097-58001-02 Revision C – August 2005
Table 6-6 describes the alarm codes and their set and clear conditions.
RTMSTATE The specified
Retimer port state
has changed.
T1 ENABLE ENABLE – Enables the
Retimer port
DISABLE – Disables the
Retimer port and clears all
active alarms associated
with the port.
SLIPCHG The Retimer slip
threshold has
changed.
T1 4 0 to 255
SLIPCLR The Retimer slip
counter has been
cleared
T1 NA NA
Table 6-6. Set and Clear Conditions for Alarms
Alarm ID Set Alarm Conditional Description Clear Alarm Conditional Description
SYS Codes
COMPAT System components are incompatible System components are compatible
EXPFAIL Expansion connectivity failed Expansion connectivity restored
PWRA Power A Failed Power A Restored
PWRB Power B Failed Power B Restored
EXTALM1 External Alarm 1 set External Alarm 1 cleared
EXTALM2 External Alarm 2 set External Alarm 2 cleared
IOC1EQPT IOC1 removed from the shelf IOC1 reinstalled
IOC2EQPT IOC2 removed from the shelf IOC2 reinstalled
IMC Codes
IOC1COMM IMC to IOC1 communication failed
IMC to IOC1 communication established
IOC2COMM IMC to IOC2 communication failed IMC to IOC2 communication established
IMCFAIL Summary alarm of BIST faults
IOC1 Codes
IOC1COMM IOC1 to IMC communication failed
IOC1 to IMC communication established
Table 6-5. Event Codes (Continued)
Event ID
Keyword
Description
AID
TYPE
Default Value/
Keyword
Description of Values

Symmetricom TimeProvider 1000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1000
Category	Clock
Language	English