114 XLi Time & Frequency System
XLi-man, Issue 8, 6/17/2008, Rev. H
SSSSSSSSSSSS SSSSSSSSSS SSSSSSS S SSS S SSSSS S
1
<N> = Option Bay Number, 1 through 10.
TM = ASCII character to denote “Time Mode” selection.
<OUT>= UTC, LOCAL, STANDARD or GPS.
<LT> = line terminator; for output strings (a carriage return and line feed ) or for input strings (a
carriage return only).
Sample entry: F77 B2 TM LOCAL<CR>
Response: OK<CR><LF>
Response: OK<CR><LF>
To obtain the Parallel BCD option board test mode information, send the following string to the Serial/
Network port:
F78<SP>B<N><SEP>TEST<CR><LF>
where:
F = ASCII character
78 = function number.
<SP> = ASCII space character one or more.
B = ASCII character to denote Option Bay number follows
<N> = Option Bay Number, 1 through 10.
TEST = ASCII character for test mode request
<LT> = line terminator; for output strings (a carriage return and line feed ) or for input strings (a
carriage return only).
Sample request: F78 B2 TEST<CR><LF>
Response: F78 B2 TEST DISABLE <CR><LF>
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
