Tandy 1000 User Manual

Chapter 101 Telecom
~~
Other Functions
On the Telecom status screen, you can use the Reset function
to change the communications parameters back to the default
settings. (Remember to Select
Yes for the first status setting,
Auto Dialing Modem.)
Note also on the status screen that the last
5 functions, Display,
Print, Save, Load, and Clear, are
all RAM buffer-related
functions.
Later, if you wish to edit an autolog file, use the Delete and Insert
functions on the Editlog screen to change line entries.
In Terminal mode, you may need to use the Break function in
addition to Disc to complete the log off process.
If you save information, use the Text application to read and
edit any unnecessary control characters that were transmitted
from the Host system.
To exit Telecom and Return to the Main Menu, press
0 at the
original Telecom screen.
Tnndy 1000
93

Tandy 1000 Specifications

General

Processor	Intel 8088
Processor Speed	4.77 MHz
RAM	128 KB (expandable to 640 KB)
Operating System	MS-DOS 2.11
Manufacturer	Tandy Corporation
Release Year	1984
Storage	Single or double 5.25" floppy disk drive (360 KB), optional hard drive
Sound	Tandy 3-voice sound
Ports	Parallel, Serial
Graphics	CGA (Color Graphics Adapter)
Graphics Modes	320x200, 640x200