Tandy 1000 - 1 Setting up the Tandy 1000

Chapter 1
SETTING UP THE TANDY 1000
Following these instructions are illustrations of each monitor/main
unit connection (one with a monochrome monitor, one with a color
monitor, and one with a television used as a monitor) and printer
configuration instructions.
1. Be sure that all equipment is turned off.
2. Connect any additional equipment, such as a printer or modem.
(Refer to the instructions provided with the additional equip-
ment.) See Figure
1.
BOARD SLOTS
PRINTER
LIGHT PEN
Figure 1
Tandy 1000
1