Tutorial
10.
Again, with the DeskMate diskette in Drive A, type:
copy
*.tws
b:
0.
Insert the formatted diskette, and press
any key. Switch diskettes
as
instructed by the screen messages.
When you are finished, the system prompt reappears. Now, you have
a bootable DeskMate diskette.
Two-Drive
System
1.
With the computer turned on, insert an MS-DOS system diskette
in Drive
A
(the lower drive), and press the RESET button. The
system prompt,
A>,
is displayed once you answer the date and
time prompts.
Type
format
b:
/s
(ENTER).
The following message appears.
2.
Insert new diskette for drive
B:
and strike
any key when ready
3.
Insert a blank diskette in Drive
B
(the upper drive), and press
anykeytobegin.
Format another
Y/N?
appearswhenthe
diskette is formatted. Press
Q
to continue formatting diskettes.
Press
Q
when the last diskette is formatted. The system
prompt reappears.
4.
Insert your original DeskMate master diskette in Drive
A
(do
not use
a
copy that already contains data you created), and type
copy
*.exe
b:
(ENTER).
5.
When the system prompt reappears,
type
copy *.hlp
b:
(ENTER).
When the transfer
of
.hlp files is complete, the system prompt
reappears.
Type
copy
*.tws
b:
(ENTER).
6.
When you are finished, the system prompt reappears. Now, you have
a
bootable DeskMate diskette.
16
Tandy
1000
To Next Page
Loading...
Need help?
General
