Tandy 1000 User Manual

Number is a value of 0, 2, 4, or 6 to indicate the joystick button you
are trapping
(L = Left, R = Right):
0 indicates Trigger L1.
2 indicates Trigger R1.
4 indicates Trigger L2.
6 indicates Trigger R2.
STRIG(0) ON STRIG(6) OFF
STRING$(number,character)
Returns a string containing the specified number of character.
Number must be in the range 0 to 255.
Character is a string or an ASCII code.
B$ = STRING$(25, "X")
PRINT STRINGs(50, 10)
SWAP variable1 ,variable2
Exchanges the values of 2 variables of the same type.
SWAP FI#, F2#
SYSTEM
Returns you to the MS-DOS command level.
SYSTEM
TAB(number)
Spaces to position number on the display.
Number must be in the range 1 to 255.
PRINT "NAME" TAB(25) "AMOUNT": PRINT
Tandy 1000
67

Tandy 1000 Specifications

General

Processor	Intel 8088
Processor Speed	4.77 MHz
RAM	128 KB (expandable to 640 KB)
Operating System	MS-DOS 2.11
Manufacturer	Tandy Corporation
Release Year	1984
Storage	Single or double 5.25" floppy disk drive (360 KB), optional hard drive
Sound	Tandy 3-voice sound
Ports	Parallel, Serial
Graphics	CGA (Color Graphics Adapter)
Graphics Modes	320x200, 640x200