Tandy 1000 - Page 336

UNIT SPECIFICATIONS
System Unit
Processor: 8088
Size:
Length: 354mm (13.9 in.)
Depth: 290mm (11.4 in.)
Height: 97mm
(3.8 in.)
3.71 Kg (81b 4
oz) With 1 Diskette Drive
Input 110 Vac 60
Hz
Output to system
Air Temperature
Weight:
Transformer:
Pin 1-17 Vac, Pin 2-GND, Pin 3-17 Vac
Environment:
System ON-60 to 90 degreees F (15.6 to 32.3 degrees C)
System OFF-50 to 100 degrees
F (10 to 43 degrees C)
System ON-8% to
80%
System OFF-8% to 80%
Humidity
Diskette Drive
Power:
Supply
Voltage
Nominal
Ripple
0 to 50 kHz
Tolerance
Including Ripple
Standby Current
Nominal
Worst Case
Operating Current
Nominal
Worst Case
Environment:
Temperature
Operating
Non-operating
Operating
Non-operating
Relative Humidity
+5Vdc Input
+ 12Vdc Input
+ 5Vdc + l2Vdc
+5Vdc Input
+ 12Vdc Input
lOOmV lOOmV
+5Vdc Input
+ l2Vdc Input
+I-5% +I-5%
+5Vdc Input +12Vdc Input
600 mA 400 mA
700 mA 500 mA
+5Vdc Input
+ 12Vdc Input
600 mA 900 mA
700 mA 2400 mA
50 to 122 degrees F (10 to 44 degrees C)
- 40 to 140 degrees F (- 40 to 60 degrees C)
20% to
80% (noncondensing)
5% to 95% (noncondensing)