Tutorial
5.
Press
(ENTER)
to skip the
F
r
om
prompt, and for the new
6.
Since you are finished using the ADDRESS file, press
0
to
7.
Use the arrow keys to position the marker over LETTER, and
8.
When the letter reappears, press
0
to use the Copy function
9.
Type
Williams
(ENTER)
to load the copy buffer from that file.
10.
To insert the address block above the salutation, make sure the
cursor
is
at the beginning of the letter, and press
(
INSERT)
or
to Insert the contents of the copy buffer at the current
cursor position.
You need to add a blank line between the customer’s address and
the salutation.
1.
Check the label line at the bottom of the screen to make sure
you’re in Add mode.
If
Replace is displayed instead of Add, press
0
to change typing modes.
2.
Move the cursor to the
D
of
D
e
a
r,
and press
EHERl
to create
a blank line.
Edwin Raymond’s return address should be placed above Mrs.
Williams’ address. A Text file called LHEAD contains the standard
heading Edwin uses at the top of all his correspondence.
1.
Press
CiiT
Q
or
(HOME)
to move the cursor to the beginning
of the text.
To insert the Text file, LHEAD, at the top of the letter, press
0
for Merge; then type
LHEAD
(ENTER)
for the filename.
To add a blank line between the addresses, move the cursor to
the
M
in
M
r
s
.
and press
(ENTER).
filename, type
Williams
(ENTER).
return to the Main Menu.
press
CENTER).
again.
2.
3.
28
Tandy
1000
To Next Page
Loading...
Need help?
General
