TEC MA-600 Series - Page 136

6. TERMINAL FILE PROGRAMMING EO3-11106
6.23 PLU Table Programming
6-116
(continued from the previous page)
Operation LCD Display Remarks
Input 100, then depress the [Enter]
key.
(Preset Price €1,00 is set.)
The [?] key depression results in that the
following guidance message appears on the
LCD display.
Input 120, then depress the [Enter]
key.
(2nd Preset Price €1,20 is set.)
The [?] key depression results in that the
following guidance message appears on the
LCD display.
Input 150, then depress the [Enter]
key.
(3rd Preset Price €1,50 is set.)
The [?] key depression results in that the
following guidance message appears on the
LCD display.
Input 12, then depress the [Enter] key.
(VAT statuses 1 and 2 are set.)
The [?] key depression results in that the
following guidance message appears on the
LCD display.
The [PLU] key depression completes
the programming for PLU code 0010.
(Addition of new PLUs and changes of
current PLUs can be performed.)
When the [PLU] key is depressed, the next
PLU code (i.e. the currently programmed
PLU code plus 1) is displayed here.
The [End] key depression allows the
ECR to end this programming.
A long receipt is issued and the display
returns to Main Menu screen.
31-10-2005 MON #0
PLU
0010 PLU0010
#01 01
#02 1,00@
#03 1,20@
#04 1,50@
#05 12
0001
0020 13:45TM