TEC MA-600 Series - Page 145

6. TERMINAL FILE PROGRAMMING EO3-11106
6.25 PLU Preset-Code Key Setting
6-125
• Flat type keyboard
1 8 15 22 29 36 43 50 57 64
71 77 83 90 97 100
2 9 16 23 30 37 44 51 58 65
72
78 84 91 98 101
3 10 17 24 31 38 45 52 59 66
73 85 92 99 102
4 11 18 25 32 39 46 53 60 67
74 79 86 93
103
5 12 19 26 33 40 47 54 61 68
75 80 87 94
104
6 13 20 27 34 41 48 55 62 69
81 88 95 105
7 14 21 28 35 42 49 56 63 70
76
82 89 96 106
3) Example
(1) To assign PLU Code 1111 to Key Location Code 55 on the ordinary type keyboard.
Operation LCD Display Remarks
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
twice.
The cursor is moved on to “3 DP/PLU”.
Depress the [3] or [Enter] key.
“3 DP/PLU” is selected.
Depress the [↓] key.
The cursor is moved on to “2 PLU”.
Depress the [2] or [Enter] key.
“2 PLU” is selected.
Depress the [↓] key twice.
The cursor is moved on to “3 ASSIGN TO
KEYBOARD”.
Depress the [3] or [Enter] key.
“3 ASSIGN TO KEYBOARD” is selected.
(continued on the next page)