44 1670 001-GB-I
HDA eco
55
5.3.4.3.10.2 Customer ID (LAN)
Display (e.g.):
Only available for operation with www.hdmanager.net or mytecalemit Cloud.
Customer number to which the HDA eco is assigned. This is where the customer ID
can be entered for the unique identification of the operator of the HDA eco. This
unique ID is necessary to allow the correct registration of one or more fuel terminals
under a particular operator. This unique customer ID is assigned by TECALEMIT after
registration.
For mytecalemit Cloud, registration takes place via https://www.mytecalemit.com.
5.3.4.3.10.3 Read Configuration (LAN)
Display (e.g.):
Optionally, the network configuration of the HDA eco can be entered directly on the
device or created conveniently with the aid of the HD Manager 8 computer program
and stored on a USB pen drive in the folder that belongs to the device(HD Manager 8:
Settings Settings Miscellaneous HDA – (W)LAN / CMR). In this menu, the previ-
ously stored configuration is imported from the USB pen drive into the HDA eco. Fol-
lowing this, you can leave the 'Interface' menu. As a general rule, further settings are
not needed.
5.3.4.3.10.4 Reset time (LAN)
Display (e.g.):
This menu item is only available for operation with mytecalemit Cloud.
Here, users can enter a time at which the HDA eco is completely restarted once a day
("Reset"). This also resets the socket modem, and the unit will re-register on the net-
work. A periodic reset can be helpful in the case of sporadic connection problems. If
the connection is stable, the factory default
"Off"
can be selected. The factory default
is " ".
Customer ID:
Reset time
Insert
To Next Page
Loading...