44 1670 001-GB-I
HDA eco
65
5.3.4.3.12.2 Customer-ID (CMR)
Display (e.g.):
Only available for operation with www.hdmanager.net or mytecalemit Cloud.
Customer number to which the HDA eco is assigned. This is where you can input the
customer-ID for clear identification of the HDA ec owner. This unique ID is required in
order to assign one or more HDA eco to the appropriate owner on the TECALEMIT
web server. The unique customer ID is given by TECALEMIT after registration.
For mytecalemit Cloud, registration takes place via https://www.mytecalemit.com.
Leave the menu point with 'EXIT'.
5.3.4.3.12.3 Signal (CMR)
Display (e.g.):
This is where the signal quality of the connection to the CMR cellular network can be
examined. Higher values indicate a better connection. A signal quality above 20 indi-
cates a stable connection.
This menu point is helpful in order to optimize measures for improving reception
quality (e.g. external aerials, repeaters etc.).
5.3.4.3.12.4 Read Configuration (CMR)
Display (e.g.):
Optionally, the configuration of the HDA eco can be entered directly on the device or
created conveniently with the aid of the HD Manager computer program or on the
corresponding website of mytecalemit Cloud and saved in the file folder belonging to
the device on a USB flash drive. The contents of the
network.dat
file generated are
encrypted.
In "HD Manager":
Settings Settings Other HDA – WiFi/LAN / CMR)
www.mytecalemit.com:
Master data -> Fuel Terminal -> Add fuel terminal
-> Network configuration
The configuration file stored on the USB flash drive can then be imported from the
USB flash drive by the HDA eco under this menu item
Insert
CMR Receive
Customer-ID:
To Next Page
Loading...