3 - 6 Te-Stack Operating Manual, 391862, en, V2.3
3 - Technical Data
Introduction
3.1.2 Product Identification
The Te-Stack can be identified by the type plate, which is located on the
instrument as shown in the figure:
On the type plate you find the following information:
Identification data
– Model: Te-Stack (according to configuration)
– REF: Ordering information (part number) of the Te-Stack
– SN: Serial number
Technical data
– Voltage: Supply voltage (Volts)
– Power: Power consumption (Watts)
Manufacturer’s name and address
More details for product identification, such as specific data of the instrument
according to the order configuration, may be taken from the instrument’s
“Maintenance and Service Logbook”.
3.1.3 Basic Configuration of Te-Stack
Fig. 3-7 Type plate location/appearance
Tab. 3-1 Necessary components of the Te-Stack (basic) configuration
Components
Te-MO version: Te-Stack support for Te-MO
Freedom EVO version: Te-Stack worktable extension
Base unit support for front mounting
Base unit support for rear mounting
Transfer station
To Next Page
Loading...
