6 - Operation
Safety Instructions
Te-Stack Operating Manual, 391862, en, V2.3 6 - 1
6 Operation
Purpose of This
Chapter
This chapter gives instructions on how to operate the Te-Stack properly and
safely.
6.1 Safety Instructions
WARNING
Automatically moving parts.
Injuries (crushing, piercing) possible, if the safety covers are not in place.
Before starting the Te-Stack, check if the instrument’s safety panel is closed.
Never operate the instrument without covers.
6.2 Switching the System On
Note: Since the Te-Stack is an option to the Freedom EVO (and possibly a Te-
MO) and powered via the Freedom EVO, we use the term “system”. System
refers to Freedom EVO, (Te-MO), and Te-Stack.
6.2.1 Checks Before Switching On the System
Note: The Te-Stack is always used together with other instruments. Refer to the
corresponding manuals for checks before switching the system on.
As requested, refill (or empty) and mount all stacker columns
Empty the waste.
Continue with chapter 6.2.2 “Switching On”, 6-2.
To Next Page
Loading...
