tecan Te-Stack 10612253 - Freedom EVO Version

9 - 2 Te-Stack Operating Manual, 391862, en, V2.3
9 - Shutdown, Storage and Shipping
Shutdown
9.1.2 Te-MO Version
9.1.2.1 Removing the Te-Stack
1 Remove the Te-MO front cover.
2 On both side panels of the Te-MO, mark the position of the Te-Stack support
(A).
3 Remove the four screws (B) and Te-Stack support with all Te-Stack base units.
4 Clean all parts and carry out the appropriate decontamination procedure.
9.1.3 Freedom EVO Version
Contact the Tecan FSE.
Fig. 9-1 Removing the Te-Stack support from the Te-MO
A
A
B
B