9 - Shutdown, Storage and Shipping
Reporting
Te-Stack Operating Manual, 391862, en, V2.3 9 - 3
9.2 Reporting
1 Fill in a copy of the “Instrument Decontamination Form” and pack it together
with the Te-Stack into the original packaging.
2 Report the shut down in your “Service and Maintenance Logbook”.
3 Continue with chapter 9.3 “Storage”, 9-3.
9.3 Storage
Proper Storage Mind the following instructions to ensure that the Te-Stack is not damaged during
storage:
ATTENTION
Damage due to oxidation.
All parts must be dry before storage.
1 Protect the Te-Stack against dust and humidity with a plastic cover.
2 Store the Te-Stack in its original packaging.
3 Keep and store the following documents together with the Te-Stack:
– This “Operating Manual”
– A filled-in “Instrument Decontamination” form
– The “Service and Maintenance Logbook”
Storage
Conditions
The environmental conditions for storage are listed in the technical data. See
chapter 3.2.6 “Environmental Conditions”, 3-10.
9.4 Transport
The Tecan FSE determines the transport method depending on the shipping
distance and other criteria.
To Next Page
Loading...
