8 - Troubleshooting
Te-Stack Operating Manual, 391862, en, V2.3 8 - 1
8 Troubleshooting
Purpose of This
Chapter
This chapter helps to resume operation after a minor problem has occurred with
the Te-Stack. It lists possible occurrences, their probable cause and suggests how
to remedy the problem.
Which Errors
can the
Operator
Correct?
The troubleshooting table below lists possible malfunctions and errors of the Te-
Stack. The operator is enabled to correct some of those problems or errors by
him/herself. For this, appropriate corrective measures are listed in the column
“Corrective measures”.
The elimination of more complicated malfunctions or errors is usually performed
by the Tecan FSE according to separate instructions. In this case, reference to the
FSE is made.
To Next Page
Loading...
