Technogym CROSS PERSONAL - Levelling

CROSS PERSONAL: Service & maintenance manual - rev. 1.1
Page 8.5
8.3. LEVELLING
OPERATION
DESCRIPTION
The machine is not flat
1. Check that all the feet touch the floor. If they do not, level the
equipment.
2. Adjust the two back feet first. Loosen the lock nut (B). Screw or
unscrew the foot (A) until the frame is stable. Aft
er adjusting,
tighten the lock nut (B).
3.
Once the back feet have been adjusted, adjust the two central
feet (C). Loosen the lock nut (B), unscrew each central foot until
it touches the floor, then tighten the lock nut.