Technogym CROSS PERSONAL - Required Tools

CROSS PERSONAL: Service & maintenance manual - rev. 1.1
Page 12.2
12.2. REQUIRED TOOLS
The following tools are required for carrying out the various disassembly, adjustment and
maintenance action on the machine:
• Small Phillips screwdriver;
• Medium Phillips screwdriver;
• Small flat Phillips screwdriver;
• Medium flat Phillips screwdriver;
• 13mm wrench;
• 17mm wrench;
• 17mm socket wrench;
• Socket wrench for M20 ringnut;
• 2.5mm Allen-T wrench;
• 3mm Allen-T wrench;
• 4mm Allen -T wrench;
• 5mm Allen -T wrench;
• Torque wrench,
• Bearing extractor;
• Scissors.
You can order a complete set of hexagonal wrenches consisting of 7 pieces: 2, 2.5, 3, 4,
5, 6 and 8 mm. The code to be used is R0003677AA.
• Excite Test box (cod.H0003180AA-UK).