Technogym CROSS PERSONAL - Dismantling the Front Guards

CROSS PERSONAL: Service & maintenance manual - rev. 1.1
Page 7.6
7.6. DISMANTLING THE FRONT GUARDS
OPERATION
DESCRIPTION
Dismantling the front
guards
1. Switch off the equipment and disconnect the power supply plug
from the wall socket.
2.
Remove the front column guard (assembly with Fast Milano
fastener).
3. Remove the headphone connector support on the central frame,
using a 2.5 mm hex key.
4. Remove the upper central guard, on the lever connection shaft.
5.
Remove the side column guard (assembly with Fast Milano
fastener).