Page 9.1
9. EQUIPMENT CONFIGURATION
9.1. CONFIG.: VISIO - VISIOWEB USER MENÙ
The procedure is activated by pressing the top right-hand corner, the bottom left-hand corner and
the bottom right-hand corner of the screen in that sequence, in Stand-By, as shown in the figure
below:
A new display will appear from which you can gain access to the various configuration menus, by
entering the password on the number keyboard:
Enter the password 2406 and press the ENTER key to confirm or EXIT to quit.
A menu will then appear which will provide access to the following sub-menus:
To Next Page
Loading...
