CROSS PERSONAL: Service & maintenance manual - rev. 1.1
Page 5.2
5.2. MOVING THE EQUIPMENT
The equipment has two fixed front wheels. To move the equipment, lift it up slightly, as shown in
the illustration, and push it forwards and backwards.
Given the weight of the equipment, we recommend 2 person be involved in lifting it.
AVVERTENZA: Lift the equipment by holding onto the frame and not the levers or
the control panel. Take great care when moving the equipment and positioning it on
the ground, as it may overbalance.
If wheels cannot be used on the floor, move the equipment using standard lifting and transport
devices.
Figure 5.2-1
After every moving, check if the equipment is flat, adjusting the left foot, as indicated
at the paragraph: Errore. L'origine riferimento non è stata trovata.“Errore. L'origine
riferimento non è stata trovata.”.
To Next Page
Loading...
