Technogym CROSS PERSONAL - DISMANTLING THE DISPLAY BOARDS

CROSS PERSONAL: Service & maintenance manual - rev. 1.1
Page 6.18
Error
Code
Description Meaning Solution
64
EEPROM Fault.
Corrupt EEPROM.
This happens when the flag
relating to the
CURRENT zone and the flag relating to the
MIRROR zone (in EEPROM) indicate results
that are not consistent.
Re-load the braking
table.
128
Not used.
-
Upgrade the Firmware
(FW) on the Brake
Board. If the same
errors occur after
upgrading h
as been
successfully
completed, the problem
is NOT the Brake
Board.