TechVision DVR-LT04120 - Page 36

You can use
mouse or direction key to highlight channel number. See Figure 4-6.
Figure 4-6
4.2.2.4 Enable all channel recording
Highlight ○ below All, you can enable all channel recording.
 All channel schedule record
Please highlight “ALL” after “Schedule”. See Figure 4-7.
When system is in schedule recording, all channels will record as you have
previously set (Main menu->Setting->Schedule).
The corresponding indication light in front panel will turn on.
Figure 4-7
 All channel manual record
Please highlight “ALL” after “Manual.” See Figure 4-8.
When system is in manual recording, all scheduled set up you have set in will be
null ((Main menu->Setting->Schedule)).
You can see indication light in front panel turns on, system begins manual record
now.
Figure 4-8
4.2.2.5 Stop all channel recording
Please highlight “ALL” after “Stop”. See Figure 4-9.
36
