TechVision DVR-LT04120 - Default

In tour mode, you can see the follo
wing interface. On the right corner, right click
mouse or click shift button, you can control the tour. There are two icons:
stands
for enabling window switch and
stands for enabling window function. Se Figure e
5-27.
Figure 5-27
5.3.10 Default
Click default icon, system pops up a dialogue box. You can highlight
to restore
om
Please highlight icon
default factory setup. See Figure 5-28.
 Select all
 General
 Encode
 Schedule
 RS232
 Network
 Alarm
 Detect
 Pan/tilt/zo
 Display
 Channel name
to select the corresponding function.
k to the previous menu.
arning!
nu color, language, time display mode, video format, IP address, user
After all the setups please click save button, system goes bac
W
System me
account will not maintain previous setup after default operation!
73
