Figure 6-6
6.2.1 Preset Setup
setups are usually operated in the Figure 6-2, Figure 6-5 and
direction arrows to adjust camera to the proper position.
as
t to one patrol number
Note: The following
Figure 6-6.
In Figure 6-2, use eight
In Figure 6-5, click preset button and input preset number. The interface is shown
in Figure 6-7.
Add this prese
Figure 6-7
6.2.2 Activate Preset
ut preset number in the No. blank, and click preset button.
atrol button. The interface is shown as in Figure 6-8.
In Figure 6-6 please inp
6.2.3 Patrol Setup
In Figure 6-5, click p
Input preset number and then add this preset to one patrol.
Figure 6-8
6.2.4 Activate Patrol
rol number in the No. blank and click patrol button In Figure 6-6, input pat
6.2.5 Pattern Setup
89
To Next Page
Loading...