TechVision DVR-LT04120 - Activate Preset; Patrol Setup (Tour Setup); Activate Patrol (Tour); Pattern Setup

Figure 4-35
.9.2 Activate Preset
nput preset number in the No. blank, and click preset button.
4.9.3 Patrol setup (Tour Setup)
The interface is shown as in Figure 4-36.Input
n
4
In Figure 4-34, please i
In Figure 4-33, click patrol button.
preset number and add this preset to a patrol (tour). For each patrol (tour), you ca
input max 80 presets.
Figure 4-36
4.9.4 Activate Patrol (tour)
ur) number in the No. blank and click patrol button
4.9.5 Pattern Setup
attern button and then click “begin” button. The interface is
to Figure 4-37 and click “end” button. You can memorize all these
In Figure 4-33, input patrol (to
In Figure 4-33, click p
shown as in Figure 4-37. Then you can go to Figure 4-30 to modify zoom, focus,
and iris.
Go back
operations as pattern 1.
Figure 4-37
55
