Figure 5-1
5.3 Setting
, highlight setting icon and double click mouse. System setting
In main menu
interface is shown as below. See Figure 5-2.
Figure 5-2
5.3.1 General
includes the following items. See Figure 5-3.
DD: MM-DD-YYYYY or DD-MM-
parator: there are three denotations to separate date: dot, beeline and
ot: Here you can set image upload interval. (This function applies to
set DST time and date. Please enable DST function and then
e
General setting
System time: here is for you to set system time
Date format: there are three types: YYYYY-MM-
YYYY.
Date se
solidus.
Snapsho
some series only).
DST: Here you can
click set button. You can see an interface is shown as in Figure 5-4. Here you
can set start time and end time by setting corresponding week setup. In Figure
5-4, enable date button, you can see an interface is shown as in Figure 5-5. Her
you can set start time and end time by setting corresponding date setup.
Time format: there are two types: 24-hour mode or 12-hour mode.
58
To Next Page
Loading...