4-100
S1
S2
S3
S4
S5
S6
Related Parameters
03-00
24VG
03-01
03-02
03-03
03-04
03-05
【54】: Switch PID1 and PID2
【55】: RTC Time Enable
【56】: RTC Offset Enable
【57】: Forcing Frequency Run
【58】: Run Permissive Function
【63】: Switch to Tolerance Range of Constant Pressure 2
【64】: Reserved
【65】: Short-circuit braking
【66】: Reserved
【67】: Reserved
【68】: External Fault 2
【69】: External Overload
*1: It can not be selected on the items 15, 19, 33, and 34 while using the permanent magnetic (PM)
motor
.
Refer to the multi-function digital input and related parameters in the following Fig. 4.4.13
Figure 4.4.13 Multi-function digital input and related parameters
To Next Page
Loading...
