TECO JSDEP Series - Servo Motor Model Code Display

1-3
1-1-3 Servo motor Model Code display
dn-08 (Servo motor Model Code display)
Use dn-08 to display servo motor code and check the servo drive and motor compatibility according to the
table below.
If the dn08 preset is not according to the list below then contact your supplier.
The motor model code is stored in parameter Cn30.
Motor Standards
dn-08 Display
Cn030 Setting
Drive Model Motor Model
Watt(KW) Speed(rpm)
Encoder
Specification
H1011 JSMA-PSCP5AB 0.05 2500
H1021
JSDEP-10A
JSMA-PSC01AB 0.1
3000
2500
H1111 JSMA-PSC01AB 0.1 3000 2500
H1121 JSMA-PLC03AB 2500
H1122 JSMA-PLC03AH
0.3 3000
8192
H1141 JSMA-SC04AB 2500
H1142 JSMA-SC04AH
0.4
(Rated 3.5A)
3000
8192
H1151 JSMA-PSC04AB 2500
H1152
JSDEP-15A
JSMA-PSC04AH
0.4
(Rated 2.5A)
3000
8192
H1211 JSMA-PLC08AB 2500
H1212 JSMA-PLC08AH 8192
H1231 JSMA-PSC08AB 2500
H1232 JSMA-PSC08AH
0.75 3000
8192
H1241 JSMA-PMA05AB 2500
H1242 JSMA-PMA05AH
1000
8192
H1251 JSMA-PMH05AB 2500
H1252
JSDEP-20A
JSMA-PMH05AH
0.55
1500
8192
H1311 JSMA-PSC08AB 2500
H1312 JSMA-PSC08AH
0.75 3000
8192
H1321 JSMA-PMA10AB 2500
H1322
JSDEP-30A
JSMA-PMA10AH
1.0 1000
8192