Menus
DST ENABLE. Sel
ect this menu item and press the left (◄)orright(►) arrow
button to enable or disable the DST (Daylight Savings Time) function in the
instrument. Press the ENTER button to implement the selection.
DST OFFSET. Select this menu item to view the DST (Daylight Savings Time)
offset setting. Press the ENTER button to edit the DST offset that will be applied
when the DST
START event occurs at the user-scheduled time. Use the left (◄)
or right (►) arrow button to select one of the time digits, and then use the up
(▲) or down (▼) arrow button to edit the selected time digit. Press the ENTER
button to implement the offset setting.
NOTE. When the DST START event occurs, the scheduled DST offset will be
added to the time zone offset.
DST START DATE. Select this menu item to view the DST (Daylight Savings
Time) start date. Press the ENTER button to e dit the DST start date. The date
takes t
he following form: Week-Day-Month (for example, Second Sunday in
March). Use the left (◄)orright(►) arrow button to select one of the date
parameters, and then use the up (▲)ordown(▼) arrow button to edit the selected
date parameter. Press the ENTER button to implement the date setting.
DST START TIME. Select this menu item to view the DST (Daylight Savings Time)
star
t time. Press the ENTER button to edit the DST start time. The time takes the
following form: HH:MM:SS. Use the left (◄)orright(►) arrow button to select
one of the time digits, and then use the up (▲)ordown(▼) arrow button to edit
the selected time digit. Press the ENTER button to implement the time setting.
DST END DATE. Select this menu item to view the DST (Daylight Savings Time)
en
d date. Press the ENTER button to edit the DST end date. The date takes the
following form: Week-Day-Month. Use the left (◄)orright(►) arrow button to
select one of the date parameters, and then use the up (▲)ordown(▼) arrow
button to edit the selected date parameter. Press the ENTER button to implement
the date setting.
DST END TIME. Select this menu item to view the DST (Daylight Savings Time)
end time. Press the ENTER button to edit the DST end time. The time takes the
following form: HH:MM:SS. Use the left (◄)orright(►) arrow button to select
one of the time digits, and then use the up (▲)ordown(▼) arrow button to edit
the selected time digit. Press the ENTER button to implement the time setting.
82 ECO8000 Series Automatic Changeover Unit User Manual
To Next Page
Loading...
Need help?
General
