Compliance information
Australia / New Zealand
Declaration o f
Conformity – EMC
Complies w ith t
he EMC provision of the Radiocommunications Act per the
following standard, in accordance with ACMA:
EN 55022:1987
. Radiated and conducted emissions, Class B , in accordance
with EN 55103-1:1996.
Australia / New Zealand contact.
Baker & McKenzie
Level 27, AMP Centre
50 Bridge Street
Sydney NSW 2000, Australia
Safety compliance
This section lists the safety standards with which the product complies and other
safety c
ompliance information.
EU declaration o f
conformity – low voltage
Compliance was demonstrated to the following specification as listed in the
Official Journal of the European Union:
Low Voltage Directive 2006/95/EC.
EN 61010-1. Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use – Part 1: General Requirements.
U.S.
nationally recognized
testing laboratory listing
UL 61010-1. Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use – Part 1: General Requirements.
Canadian certification
CAN/CSA-C22.2 No. 61010-1. Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use – Part 1: General
Requirements.
Additional compliances
IEC 61010-1. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 1: General Requirements.
Equipment type
Test and measuring e quipment.
Safety class
Class1–groundedproduct.
ECO8000 Series Automatic Changeover Unit User Manual ix
To Next Page
Loading...
Need help?
General
